The update file "FRITZ.Box_5530-xx.xx.image" on ftp.avm.de contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 5530 Fiber. **Attention:** This update file is only intended for use with FRITZ!Box 5530 Fiber! Please follow the instructions at the end of this file to install the update. ``` Produkt: FRITZ!Box 5530 Fiber Version: FRITZ!OS 8.0 Language: Dutch, English, French, German, Italian, Polish, Spanish Release date: 08/10/2024 ``` **New features:** ------------------------------------------------------------ - User interface: Diagram showing the connections in the overview (homepage) - New Online Monitor informs about the load on the internet connection and the load by individual network devices. - Internet: Now IPv6 data can also be transmitted via a WireGuardŽ VPN tunnel - Mesh: Redesigned diagram of all devices connected with the FRITZ!Box with additional functions - Push service: Reworked design and more convenience ------------------------------------------------------------ With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices. ------------------------------------------------------------ Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version. ------------------------------------------------------------ ## Internet: - **NEW ** IPv6 data now can also be transferred via a WireGuardŽ VPN tunnel (new WireGuardŽ connection required, no forwarding of IPv6 data to the internet) - **NEW ** New Online Monitor diagram with expanded information on the load on the internet connection by individual network devices - **NEW ** Extend online time restricted through parental controls by 45 minutes directly in the detailed settings of the network device - **Improved ** When sharing internet access to FRITZ!Box services, an additional IP block list from AVM can be used - **Improved ** For VPN network couplings via WireGuardŽ, the "fritz.box" domain is resolved in the entire coupled network - **Improved ** For VPN network couplings via WireGuardŽ, the domain of the remote site can be specified for DNS resolution - **Improved ** More precise explanations of errors during the configuration of WireGuardŽ connections - **Improved ** Added notification about potential risk of sharing port 80 or 443 - **Improved ** Preselection of easiest configuration method for the internet providers Telekom, Vodafone, and EWE for initial configuration on a fiber optic connection - **Improved ** Improved details during the initial configuration behind a fiber optic modem (ONT) - **Improved ** The FRITZ!Box user interface can also be opened in the home network by entering "fritzbox.internal" and "fritzbox.home.arpa" ## Wi-Fi: - **NEW ** Visualization of Wi-Fi usage in the home network for the last 7 days added on "Wi-Fi > Wi-Fi Channel" ## Mesh: - **NEW ** Definition of a name and an icon for network devices directly in the Mesh Overview diagram (tooltip) - **Improved ** Details about the LAN connections between FRITZ! devices given in the Mesh Overview diagram (tooltip) ## Telephony: - **Improved ** Recordings on the answering machine now with higher voice quality (HD audio) - **Improved ** The "Enable encrypted telephony" option is offered for the provider "Drillisch GmbH" - **Improved ** Order of telephone numbers in telephone book entries can be changed more easily - **Improved ** The call list shows the country, or for domestic calls, the location, where the call originated ## DECT/FRITZ!Fon: - **Improved ** Display of Wi-Fi account information can now be switched on or off for each FRITZ!Fon - **Improved ** Easier deletion of multiple emails via the "delete multiple" option - **Improved ** "Weather" start screen now available in all countries ## Home Network: - **NEW ** Names can now also be assigned to devices that use the guest access - **NEW ** Improved overview through individual icons for network devices - **Improved ** Detailed settings of a device on the "Home Network > Network Connections" page redesigned - **Improved ** Troubleshooting and settings for speeds on WAN/LAN connections reworked (FRITZ!Boxes with WAN connection only) - **Improved ** Random calculation of the Unique Local Address (ULA, IPv6) in accordance with RFC 4193) ## Smart Home: - **NEW ** On the device page of FRITZ!DECT 350 window sensor in the FRITZ!Box user interface, window open detection can be configured for the selected radiator controls - **NEW ** The templates also allow the user to set the target temperature for radiator controls; the brightness, saturation, and color for lights, and the position for roller shutters in percentage steps - **NEW ** The temperature settings for the radiator control can be restricted to a lowest and highest temperature (from software version 5.20 for FRITZ!DECT 301 and FRITZ!DECT 302) - **NEW ** Routines can also be triggered by a preset time or a time relative to sunrise/sunset - **Improved ** Reworked registration of Smart Home devices via the FRITZ!Box user interface ## System: - **NEW ** New diagram of the FRITZ!Box connection status in the overview (homepage) - **Improved ** File name for saved settings now includes name of individual FRITZ!Box - **Improved ** A personal subject line can be be specified for push service - **Improved ** Reworked configuration of push service - **Improved ** Communication to all AVM services for the FRITZ!Box (update, etc.) preferentially via IPv6 with fallback to IPv4 - **Improved ** Link to reset the password more prominent in the "Forgot password" email - **Improved ** With "Diagnostics > Function" the services for the Network Time Protocol are checked and relevant information displayed about any errors found - **Improved ** Simplified address changes in push service through the new default recipient, which can be specified independently of the sender - **Improved ** Changes to sender information for email from push service require additional confirmation - **Improved ** Shorter interval for sending push service emails with notifications on user logins with the FRITZ!Box - **Improved ** "Transfer Your Settings to a New FRITZ!Box" wizard improved for a smoother switch from DSL to fiber optic or cable - **Improved ** More reliable detection of FRITZ!Box updates already performed through use of the "Transfer Your Settings to a New FRITZ!Box" function ## Powerline: - **NEW ** Password for all devices in the powerline network can be changed with a single click # Additional Improvements in FRITZ!OS 8.00 ## Internet: - Changed:- The AES-192 encryption algorithm is no longer supported in Phase 2 SAs of VPN connections - **Changed ** The hash algorithm MD5 and the 3DES encryption algorithm are no longer used on VPN connections over IPSec for reasons of security - **Changed ** The IPv6 option "Assign unique local addresses (ULA) as long as no IPv6 internet connection exists (recommended)" is no longer offered - **Changed ** In PPPoE passthrough operation of the FRITZ!Box, DNS root queries are no longer filtered via UDP - **Fixed ** Under some circumstances the network traffic of a connected telephone system was not routed via a specially configured VoIP interface - **Fixed ** Under certain circumstances, OpenWrt devices operated behind a FRITZ!Box did not receive an IPv6 connection to the internet - **Fixed ** Independent port sharing (UPnP) for the same port with various home network devices did not work under certain circumstances - **Fixed ** In some circumstances active WireGuardŽ connections were interrupted when adding or deleting WireGuardŽ connections - **Fixed ** VPN connections via WireGuardŽ to an endpoint given as multiple (comma separated) domains could not be established ## Wi-Fi: - **Changed ** For improved compatibility with older wireless devices, security settings can be adjusted on the "Wi-Fi > Security" page - **Changed ** Text reference to selection of "WPA2 + WPA3" Wi-Fi encryption removed - **Fixed ** Display of Wi-Fi properties of a registered wireless device was in rare cases incorrect - **Fixed ** When 5-GHz channels were checked for radar (DFS), no wait cursor was displayed under these channels in the user interface - **Fixed ** Repeaters that were logged into the guest network were not marked as "Wi-Fi guests" ## Home Network: - **Changed ** Recommendation to enable the automatic update search at the bottom of the Mesh Overview page ## System: - **Changed ** The link generated by "Forgot Password" push service in the email is valid for 20 minutes - **Fixed ** After results of functional diagnostics were sent, an event message about changed FRITZ!Box settings was displayed - **Fixed ** The "Live TV" button for Magenta TV streaming was missing in the user interface when displayed on smartphones and tablets - **Fixed ** When accessing the FRITZ!Box interface via the internet (https), individual elements or pages were sporadically missing ------------------------------------------------------------ Previous Versions of FRITZ!OS ------------------------------------------------------------ # Improvements of FRITZ!OS 07.81 ## Internet: - **Fixed** During active VPN connection over WireGuardŽ with transmission of entire network traffic, the FRITZ!Box allowed selection of user for HTTPS access - **Fixed** In certain browser versions https pages were not filtered reliably - **Fixed** Incorrect entry for the NTP server in DHCPv6 reply of the FRITZ!Box resulted in IPv6 home network devices not being able to obtain a valid time - **Fixed** No Mesh telephony was possible via a FRITZ!Box connected over Wi-Fi as a Mesh Repeater (FRITZ!Box 7490 only) ## Telephony: - **Fixed** Telekom CompanyFlex SIP trunking - Outgoing calls failed when telephone number suppressed - **Fixed** Under certain conditions, voice transmission was disrupted after a short time during ongoing telephone calls ## Smart Home: - **Fixed** Devices that were registered with the FRITZ!Smart Gateway were not displayed on the user interface of the connected FRITZ!Box - **Fixed** Link for automatic adjustment between an external temperature sensor and a radiator control was lost when the FRITZ!Box restarted - **Fixed** Status of the FRITZ!DECT 350 was transmitted incorrectly in the Smart Home home network - **Fixed** The freely selectable device name for FRITZ!DECT 350 was not adopted - **Fixed** Under certain circumstances empty Smart Home pages were displayed in the FRITZ!Box user interface ## System: - **Fixed** After failed download of a FRITZ!OS update, under certain circumstances no further update queries - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, a backup of the FRITZ!Box internal memory unnecessarily included files that were saved on an external USB storage device connected to the FRITZ!Box - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, a successfully established internet connection via DOCSIS was sporadically not detected and an incorrect error page was then displayed - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, an error occurred if an IPv4 address range other than the preset range was used in the home network - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the "Factory settings" status of the new FRITZ!Box was not always reliably detected and it was not possible to transfer the settings - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the IP filter list was not transferred to the new FRITZ!Box - **Fixed** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the settings for DNS rebind protection were not transferred to the new FRITZ!Box - **Improved** When using the "Transfer Your Settings to a New FRITZ!Box" wizard, the settings for the captive portal of a public Wi-Fi hotspot are now transferred to the new FRITZ!Box # New functions of FRITZ!OS 07.80 ## Fiber: - **NEW** Detailed information on the fiber optic connection added to "FRITZ!Box Info" push service - **NEW** Reworked fiber optic overview for FRITZ!Box on the fiber optic connection [1] - **NEW** Simplified configuration through helpful hints about activating the FRITZ!Box for various internet providers ## Internet: - **NEW** Simplified configuration for connection to a fiber optic modem (ONT) - **NEW** The speed of the Ethernet connection between LAN 1/WAN and the upstream device (e.g., fiber optic modem) is displayed on the overview page # Further Improvements of FRITZ!OS ## Fiber: - **Improved** Interoperability to various fiber optic remote sites improved ## Internet: - **Fixed** IPv6 sharing settings as "Exposed Host" for devices with delegated IPv6 prefix were sporadically deleted - **Fixed** Problem with DNSSEC validation in FRITZ!OS - **Fixed** When an internet connection was reestablished, occasionally an outdated IPv6 prefix was not deleted on a downstream router - **Improved** Increased robustness of time determination (NTP) - **Improved** New provider "Odido" can be selected for the Netherlands - **Improved** Option for postponing automatic clearing of connection by the provider extended by adding a period that can be selected for "other provider" ## Wi-Fi: - **Fixed** Connection problems with the Nuki Smart Lock - **Improved** Wi-Fi performance optimized ## Telephony: - **Fixed** During an active parallel call, after a brief period the call was signaled only at the call destination - **Fixed** Termination of outgoing calls to certain mobile sites after two minutes - **Improved** Telephony more stable ## DECT/FRITZ!Fon: - **Change** Presets for the Deutschlandfunk web radio stations were updated ## System: - **Fixed** "Configuring the Internet Connection" wizard was displayed although the device had already been configured by the provider - **Fixed** Failure of switching from a FRITZ!Box Cable to a FRITZ!Box Fiber when using the wizard - **Improved** Loading times of the FRITZ!Box user interface for internet access via LAN 1/WAN optimized - **Improved** Stability ------------------------------------------------------------ # New functions of FRITZ!OS 7.56 ## System: - **NEW** In the new energy-saving mode, Wi-Fi, LAN and USB use even less power for slightly reduced performance - **NEW** New wizard transfers all important Internet, telephony, and WLAN settings as well as connections to mesh, telephony, and smart home devices to a new FRITZ!Box ------------------------------------------------------------ # Further Improvement of FRITZ!OS 7.58 ## Internet: - **Fixed** ppp connection fails on some lines # Further Improvements of FRITZ!OS 7.57 ## System: - **Fixed** stability and security increased # Further Improvements of FRITZ!OS 7.56 ## Internet: - **Improved** Clarified wording when configuring WireGuard VPN connections - **Improved** NTP interoperability improved through better estimation of the hardware clock's deviation - **Improved** Optimized switching from public DSN servers to provider-side DNS servers - **Improved** The setting to send all IPv4 data traffic of the FRITZ!Box via the WireGuard VPN connection to (!) a single device is no longer supported - **Fixed** During preparation of the first WireGuard connection via remote dial-in the FRITZ!Box ended up in permanent wait mode - **Fixed** In certain scenarios, switching the type of internet connection led to the WAN interface being switched to LAN - **Fixed** Interoperability of IPSec VPN connections to LANCOM remote sites including usage of VNC and RDP with active packet acceleration not available - **Fixed** MyFRITZ! access permission (device sharing) could sometimes only be terminated via IPv4 - **Fixed** Occasionally an IPv6 prefix sharing of a previous "outdated" prefix for a downstream router was not deleted - **Fixed** On DS Lite connections, switching off IPv6 manually (incorrect configuration) could result in repeated dial-in attempts by the FRITZ!Box - **Fixed** On TIM connections (Telecom Italia), configuration of a WireGuard connection led to repeated clearing of the internet connection - **Fixed** Parental controls: Tickets for devices with the standard profile could not be redeemed - **Fixed** Problems with functionality and/or display of the parental controls in certain application scenarios - **Fixed** Repeaters sometimes used external NTP servers for initial time determination even if the upstreamFRITZ!Box offered an NTP server - **Fixed** Under certain circumstances a switch to public DNS servers occurred although the current DNS server could be reached - **Fixed** Under certain circumstances a switch to public DNS servers took place too early - **Fixed** VPN: When configuring an IPSec-LAN-LAN connection, the address of the FRITZ!Box was not proposed - **Fixed** When all IPv4 data traffic was routed over a WireGuard VPN connection, incoming calls were not always signaled - **Fixed** When packet acceleration was enabled during longer LAN-LAN linkups to CISCO remote sites via IPSec, occasional connection losses occurred ## Wi-Fi: - **Fixed** Mesh Repeater operating mode: The "Select Wi-Fi Network" list did not display invalid Wi-Fi network names (SSID) ## Mesh: - **Fixed** After changing the connection of a repeater, the connection display on the "Home Network > Mesh" page of the user interface was wrong - **Fixed** When using certain powerline adapters together with a network switch, the connection display on the "Home Network > Mesh" page of the user interface was wrong ## Telephony: - **Improved** Robuster handling of inconsistent data in Apple telephone contacts - **Improved** Support for using up to 10 individual telephone numbers (MSNs) with the "Telekom CompanyFlex" rate - **Change** Outdated entries removed from the list of telephone providers ## DECT: - **Improved** Support for DECT headsets from the Sennheiser EPOS series for outgoing calls and picking up calls via the headset button ## Home Network: - **Fixed** Devices with a dot in their name could no longer be renamed - **Fixed** Display for search for updates for devices in the Mesh was not suitable in certain cases - **Fixed** Possibly lacking rendering of IP addresses could cause subsequent defects ## System: - **Fixed** "Change notice" push service sent too often information on supposedly new port sharing - **Fixed** Repeater events were occasionally listed twice in the Event Log ------------------------------------------------------------ # New Features in FRITZ!OS 7.50 ## Fiber: - **NEW** Wizard for initial setup and configuation of FRITZ! fiber devices ## Internet: - **NEW** Automatic prioritization provides for fairly distributed data rates throughout the entire FRITZ!Box network (home network and guest network) - **NEW** VPN with WireGuard for simple setup of fast, secure VPN connections - **NEW** The MyFRITZ! direct connection allows you to receive information on the FRITZ!Box in real time on MyFRITZ!Net. ## Telephony: - **NEW** Call handling allows call blocks and call diversion (e.g. to answering machine) for callers "not in the telephone book" (telephone book as positive list) - **NEW** On a SIP DDI line for corporate customers, call diversion settings can be configured so that the caller number is displayed at the destination (partial rerouting) ## DECT/FRITZ!Fon: - **NEW** The new, optional "Voice" ringtone announces the name in the telephone book that matches the caller number, or the location and the telephone number. For an alarm or appointment, the ringtone announces the reason for the reminder - **NEW** The new FRITZ!Fon convenience function "Appointment Calendar" rings to remind about appointments ## Smart Home: - **NEW** Configure and apply scenes to generate the mood for any occasion - **NEW** Create and enable or disable routines (if-then combinations) for automatic interactions in the Smart Home - **NEW Templates for the comfort functions switch Wi-Fi access, switch Wi-Fi guest access, start telephone call, switch answering machine, send email (push service), and open web service (URL) - **NEW** Selection of an additional display of the temperature and humidity profile on the FRITZ!DECT 440 - **NEW** Natural lighting sequences for device groups and templates with FRITZ!DECT 500 - **NEW** Support for compatible external window sensors for the radiator controls' open window detection ## System: - **NEW** "Help and Info" in the user interface: A completely overhauled help function with many instructions based on user scenarios and a strong search engine ## FRITZ!Apps: - **NEW** MyFRITZ!App offers the option to enable prioritization for internet access on each home network device - **NEW** MyFRITZ!App allows home network devices to be renamed - **NEW** MyFRITZ!App allows a MyFRITZ! account to be created for MyFRITZ! internet access to the user interface of the FRITZ!Box (for iOS) - **NEW** FRITZ!App Smart Home supports scenes and the enabling and disabling of routines - **NEW** FRITZ!App TV allows the TV function (DVB-C) and station search to be enabled for FRITZ!Box Cable devices ------------------------------------------------------------ # Additional improvements in FRITZ!OS 07.50 ## Internet: - **Improved** When the DNS server of the internet provider (or the listed DNS server) is interrupted, automatic switch to the public DNS server - **Improved** Failure detection via DNS validation added for "Expanded failover protection" - **Improved** FRITZ!Box services (SMT, FTP, IGD and TR-064) offered via Bonjour or mDNS - **Improved** Unwanted queries from certain IP addresses to FRITZ!Box services can be blocked with the new IP block list - **Improved** "QUICK" added to the internet protocols supported by parental controls - **Improved** When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed - **Improved** Support for VPN user dial-in for Android mobile telephones and tablets with IKEv2 IPSec (preshared key) - **Improved** Optimized upload and download speeds by adjusting the TCP segment size (MSS clamping), now also for IPv6-based connections - **Improved** IPv4 VPN connections (IPSec) can be tunneled via IPv6, for instance to reach FRITZ!Box devices on DS Lite connections (IP6 tunnel for IPv4, IPv4-inIPv6) - **Improved** In the user interface, an image now illustrates the different types of VPN connections - **Improved** No publication of IPv4 address to MyFRITZ!Net on dual-stack connections with carrier-grade NAT; MyFRITZ! address always resolved here into the IPv6 address - **Improved** After a restart, the FRITZ!Box refreshes its IP address with MyFRITZ!Net immediately (DynDNS update) - **Improved** A FRITZ!Box in "Mesh Repeater" mode is automatically registered with the MyFRITZ! account of the Mesh Master - **Improved** IPv6 on the FRITZ!Box enabled by default for all internet connections - **Improved** FRITZ!Box can be operated on IPv6-only connections - **Improved** Support for IPv6 during prioritization of network applications and prioritization of a home network device - **Improved** The IPv6 Interface Identifier used on the WAN port is chosen at random - **Improved** Improved tips and error messages on sharing ports on DSL Lite connections with PCP support - **Improved** Data traffic from Wi-Fi calling (VoWifi) with smartphones prioritized over the FRITZ!Box internet connection - **Change** Predefined selection of DynDNS providers replaced by a general settings option - **Change** The "IPv6" tab is displayed for IPv6-only connections - **Change** Support for the User Service Platform specification (USP, Broadband Forum TR-369) and configuration on the "Provider Services" tab - **Change** When a new port sharing setting is created, the outdated "eMule" application is no longer listed - **Change** Outdated entries removed from the provider list for internet access - **Fixed** The ICMP identifier for pings was set to 0 by the FRITZ!Box in some rare cases - **Fixed** The FRITZ!Box could send an invalid Phase1 ID for VPN user dial-in via IPSec - **Fixed** The entry field for the IPv6 LAN prefix was too small - **Fixed** The IPv6 address could not be entered manually for IPv6 port sharing - **Fixed** Devices in the guest network with a captive portal were not connected to the internet via IPv6 - **Fixed** IPv6: When SLAAC was used and the DHCPv6 server was disabled in the FRITZ!Box, after a restart IPv6 could not longer be used in the home network - **Fixed** In individual cases, deletion of a port sharing setting deleted additional port sharing settings of the same device - **Fixed** VPN connections (IPSec) to StrongSWAN via IPv6 failed under some circumstance - **Fixed** VPN connections (LAN-LAN) could not be saved without a name - **Fixed** In some scenarios the FRITZ!Box's NTP server did not work after re-establishing the internet connection - **Fixed** Under certain circumstances, not all DNS servers made available by the provider were used ## Wi-Fi: - **Improved** When a radar event is detected, the system attempts to hold the channel with reduced bandwidth - **Improved** When encryption on the Mesh Master is changed to "non-encrypted", activation of the 5-GHz Wi-Fi network is ensured and wireless devices are correctly deregistered if necessary - **Improved** Data rates increased when exchanging data with certain wireless devices - **Improved** The legend below the "Allocation of Wi-Fi Channels" diagram on the "Wi-Fi / Wi-Fi Channels" page is now displayed in a single line - **Improved** Optimized automatic channel selection when checking for prioritized use in the 5-GHz Wi-Fi network - **Improved** The adjustment of radio channel settings in the 5-GHz frequency band now allows all channel numbers to be selected - **Improved** The overlay with message on the "Load on the Current Wi-Fi Channel" diagram is now also shown when VHT160 mode is enabled - **Change** New message under "System / Event Log" when a new session key was negotiated (encrypted connections compliant with the WPA3/SAE standard) - **Change** Restructuring of the "Wi-Fi > Wi-Fi Network", "Wi-Fi > Security", and "Wi-Fi > Wi-Fi Channel" pages - **Change** MAC address filters are limited to a maximum of 128 entries - **Fixed** On the user interface for the "Wi-Fi Guest Access", starting the WPS quick connection was linked with the "Wi-Fi / Security / WPS" page - **Fixed** Incorrect information when Wi-Fi disabled when "Internet connection via Wi-Fi" is selected - **Fixed** The period for displaying the load on the Wi-Fi channel could not be changed in the user interface when the 2.4-GHz Wi-Fi network was disabled - **Fixed** Sorting of "Other Wi-Fi Networks in Your Vicinity" table by name did not always work reliably ("Wi-Fi / Wi-Fi Channel" page) - **Fixed** Preset name for Wi-Fi guest access linked to the language selection - **Fixed** When a WPS quick connection was started during the check for higher-priority users (e.g. radar), an incorrect message could be displayed under "System / Events" ## Mesh: - **Improved** Display of home network connections on the "Mesh" page of the user interface responds more quickly to changes - **Improved** Home network devices (e.g. printers or NAS) displayed in the "Mesh Overview" can be opened directly by link - **Improved** Changed country and language settings of the Mesh Master are automatically transmitted to the Mesh Repeater - **Improved** New message in "System / Event Log" when FRITZ!OS removes a network loop - **Improved** "Mesh Overview" now shows network switches that use the LLDP protocol - **Improved** "Mesh Overview" now shows deployed network switches or access points in sequence - **Improved** Indication on the start page of the user interface when there are FRITZ! devices in the home network that are not yet enabled for Mesh - **Improved** Region and language settings of the FRITZ!Box are adopted by FRITZ!Repeater(s) - **Change** Registration of new Mesh Repeaters with the "Connect" button supports the "Wi-Fi 6 Device Provisioning Protocol (DPP)" ## Telephony: - **Improved** Online contacts from web.de, gmx.de, and 1&1 converted to CardDAV - **Improved** Revised display of table of configured call diversions - **Improved** Encrypted telephony more robust against lost connections - **Improved** Optimization for integration of a telephone book into Mesh - **Improved** Designation of a caller's telephone number in the call list, even when a telephone number specified by the caller was also transmitted - **Improved** Optimization of automatic configuration of telephone numbers by the internet provider - **Improved** Reworked texts for push services on fax function and answering machines on fax function and answering machine - **Improved** Support for more call scenarios with voice data transmission before call acceptance (P-Early-Media) - **Improved** Wizard for telephony devices enables configuration of internal fax function without enabling fax reception - **Improved** Display of certain table columns in the "Telephone Numbers" can be switched on or off - **Improved** CAPI over TCP can be disabled if desired via "Diagnostics / Security" - **Improved** Prioritization of telephony data adjusted to comply with the Deutsche Telekom specification 1TR112 V14 - **Improved** FRITZ!Box takes note of the last 20 destination telephone numbers for call diversion and offers these when new call diversion settings are configured - **Improved** For messages on the answering machine, the name that matches the caller's number in the telephone book, or the location and telephone number, can be announced while listening to messages - **Improved** Call diversion settings and call blocks for incoming calls can be restricted to a single telephone number in the home network - **Improved** Supports groups for online contacts from Apple - **Improved** Support for photos for online contacts from Apple, Telekom, and CardDAV providers - **Change** Different designations in the user interface for telephones on the "FON 1" and "FON 2" jacks - **Fixed** If the internal fax machine was used with the "only send" setting, incoming calls were not logged in the call list - **Fixed** Newly created telephone numbers could not always be edited retroactively - **Fixed** Root number was not displayed when the settings of the SIP DDI line were edited - **Fixed** Umlauts in the names of telephony devices were sometimes converted into special characters - **Fixed** Under certain rare conditions, the initiator of a three-party conference was not able to hear the two other parties ## DECT/FRITZ!Fon: - **Improved** Higher resolution of images from Google online contacts - **Improved** Convenient control of DECT headsets that are GAP or CAT-iq 2.x-compliant - **Improved** Quick dial for number keys 2 to 9 can be set up directly on the FRITZ!Fon by pressing and holding the numbers - **Improved** More convenient use of DECT handsets - **Improved** Three new ringtones with bird sounds available for FRITZ!Fon ("Whistling", "In the Woods" and "Yardbirds") (configured under "MENU / Settings / Audio / Ringtone / Own ringtone") - **Change** Missed calls older than 28 days are no longer signaled by a message key blinking red on the FRITZ!Fon ## Home Network: - **Improved** Reworked details pages for network devices - **Improved** FRITZ!Powerline devices can be restarted in the "Device Details" of the FRITZ!Box user interface under "Home Network / Network" or registered by clicking a button - **Improved** Own network device highlighted in the overviews of the user interface - **Improved** More flexibility when assigning your own names for a network device in the home network for display in the user interface: Spaces and special characters are allowed - **Improved** The symbol in the user interface for prioritized network devices was updated - **Improved** Reworked user guidance through changing of the FRITZ!Box name ## Smart Home: - **Improved** Template for radiator controls expanded with addition of comfort temperature and cool-down temperature as well as antifreeze and boost functions - **Improved** Sunrise/sunset schedule with more settings options independent of sunrise and sunset - **Improved** The "Adaptive heating start" function can be disabled for radiator controls - **Change** "Smart Home" menu subdivided into "Devices & Groups", "Automation" and "Operation" ## System: - **Improved** New display of Wi-Fi connections between FRITZ! devices - **Improved** Summary of information areas on the "Overview" page for better orientation - **Improved** New design and improved operation concept for logging in to the FRITZ!Box user interface - **Improved** Revised layout of the FRITZ!Box user interface - **Improved** Changed operating concept for changing settings in the user interface - **Improved** Under "System / FRITZ!Box Users / Apps", the FRITZ!Box user from which each app has been configured is displayed for each app - **Improved** The "Forgot Password" push service email now contains information on the device that requested this mail - **Improved** If desired, the selection list of FRITZ!Box users can be hidden during login to the user interface from the home network - **Change** Simplified flashing behavior of the FRITZ!Box LEDs when connection is triggered by the "Connect" button - **Change** The hyperlinks for Contents, Manual, Tips & Tricks, en.avm.de, and Legal Notice are now located under "Help and Info" - **Change** New contents under "Help and Info / Get to Know the Functions" - **Change** Additional confirmation for configuring certain settings can no longer be switched off - **Change** The push service for the Wi-Fi guest access sends registration and deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which the devices are registered - **Fixed** The display of several "Exposed Hosts" for two different devices under "Diagnostics / Security" was sometimes misleading ## Security: - **Improved** Use of a random SIP port possible under "Telephony / Telephone Numbers / Line Settings / Security" - **Improved** All a user's rights listed under "System / FRITZ!Box Users" - **Improved** Information about security methods currently used on SIP remote sites under "Diagnostics / Security / Telephony" - **Improved** Display of the last ACS connections under "Diagnostics / Security / Provider Services (TR069)" - **Improved** While login is blocked due to an incorrect password entry, the password entry field can be edited for the next login attempt - **Improved** SIP port can be reached from the internet only by the set protocol (IPv4 or IPv6) - **Improved** Protection from frequent login attempts with incorrect password via the SMB protocol ## FRITZ!Apps: - **Improved** FRITZ!Apps support with explanation of where the preset FRITZ!Box password is found on the FRITZ!Box - **Improved** MyFRITZ!App shows when internet access is blocked for each home network device - **Improved** MyFRITZ!App with additional connection information for the home network devices - **Improved** When MyFRITZ!App is registered with a FRITZ!Box that has not yet been configured, MyFRITZ!App indicates this and offers to open the browser for configuration - **Improved** MyFRITZ!App displays Wi-Fi dual-band connections for "Your Mesh" in the overview diagram - **Improved** MyFRITZ!App reliably displays Mesh connection paths graphically, even for more complex constellations - **Improved** MyFRITZ!App indicates when Mesh functions have not been enabled in the Mesh Repeater - **Improved** MyFRITZ!App sets the name of the smartphone or tablet as the name of the network device in the home network of the FRITZ!Box if no name was assigned yet (for Android) - **Improved** MyFRITZ!App supports the convenience function of call diversion for callers "not in the telephone book" - **Improved** FRITZ!App WLAN displays the channel bandwidth of the Wi-Fi connection - **Improved** FRITZ!App Smart Home displays the adaptive heating (preheating phase) of radiator controls - **Improved** FRITZ!App Smart Home displays open window detection with a window sensor on the radiator control - **Improved** FRITZ!App Smart Home supports the creation of templates for the current light setting - **Improved** FRITZ!App Smart Home displays a message when applying templates ----------------------------------------------------------- # Improvements in FRITZ!OS 07.30 ## Fiber: - **Improvement** Enhanced interoperability to certain GPON OLT with certain profile settings ## Internet:  - **Improvement** HTTPS connections within VPN tunnels in Client > LAN scenarios optimised - **Improvement** Fiber access profile for Deutsche Telekom with Easy Support integrated - **Improvement** Fiber access profile inluding IPTV settings for Delta (Netherlands) integrated - **Improvement** New internet access profiles via WAN for Italian service providers integrated - **Improvement** Better handling of IPTV packages in scenarios with high upstream utilization ------------------------------------------------------------ # Top functions of FRITZ!OS 07.29 - Priority for working from home - Easy to enable prioritization of a computer for internet access - FRITZ!Fon displays weather forecast on the start screen - FRITZ! Smart Home now supports DECT compatible roller shutters - Smart Home: Lightsequence "Wakeup/Sleep" for FRITZ!DECT 500 and compatible DECT LEDs - Smart Home: TOP - Perfect indoor climate with FRITZ!DECT 440 - humidity information at a glance - For FRITZ!Box's integrated fax machine: Log of received and sent faxes - Telefony: TOP - Many improvements to user interface for using the telephone book, call diversion and call blocks ------------------------------------------------------------ # Improvements in FRITZ!OS 7.29 ## Fiber: - **Improved** Interoperability to certain networks automated/improved ## Internet: - **Improved** List of trusted certification authorities updated - **Improved** When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed - **Improved** Additonal internet access profiles added ## System: - **Improved** Stability - **Improved** Onlinemonitor Integration ## Telephony: - **Fixed** Restricted availability by telephone when using telephony via IPv6 - **Improved** Encrypded telephony more robust against lost connections - **Improved** Enhanced interoperability for use of encrypted telephony - **Change** Necessary adaptation to changed demands for authentication with Google (Google telephone book and calendar) - **Improved** Better interoperability for CardDAV-based online telephone contacts ------------------------------------------------------------ # Improvements in FRITZ!OS 07.27 ## Fiber: - **NEW** Registration-ID für XGS-PON connections can be set in GUI - **NEW** FRITZ!SFP Transceiver module is activated by FRITZ!OS - **Improved** Eventlog entry for detection of connected fiber technology optimized - **Improved** Settings for specific operators are set automatically by FRITZ!OS - **Fixed** Display of technical details for FRITZ!SFP XGS-PON corrected - **Fixed** Checkmark for the PLOAM password ("ONT-Installationskennung") can be removed again ## Wi-Fi: - **Improved** Better stability - **Fixed** Possible problems while registering repeaters after changing Wi-Fir encryption from "WPA2+WPA3" to "non-encrypted" - **Fixed** WPS for the Wi-Fi Guest Access did not work reliably with non-encrypted Wi-Fi - **Fixed** The legend under the "Allocation of Wi-Fi Channels" diagram was not rendered in a single line ("Wi-Fi /Wi-Fi Channels" page)) - **Fixed** Vulnerabilities in the processing of incoming fragmented frames and aggregated MPDUs (A-MPDU) fixed ("Fragatttack") ## Telephony: - **Change** Necessary change for use of a Google online telephone book in the future - **Fixed** After editing CompanyFlex Cloud PBX telephone numbers, these numbers were no longer registered - **Fixed** No display of call blocks if these included an entry without a telephone number - **Fixed** Searches in the telephone book could be performed using a name, but not a telephone number - **Fixed** Configuration of internal fax function not possible when a telephone book contained an entry without a telephone number - **Fixed** During use of encrypted telephony, if a caller cancels a call before it is picked up, telephones on the FRITZ!Box could ring endlessly - **Fixed** Occasionally, three-party conferences did not work on an analog telephones ## DECT: - **Fixed** After long operation times, certain functions were sometimes no longer available ("search for updates" and others...) ## System: - **Change** Push Service: Various corrections to content of "Change notice" email - **Fixed** The code of the Google Authenticator could not always be entered on the user interface ------------------------------------------------------------ # Improvements in FRITZ!OS 07.26 ## Fiber - **Improved** Interoperability to several GPON access nodes optimized -------------------- # New functions of FRITZ!OS 7.25 ## Internet: - **NEW** Prioritization of a home network device can now be enabled on the FRITZ!Box user interface ## Telephony: - **NEW** Fax function: Log for received and sent faxes - **NEW** Support for the "Telekom CompanyFlex" business telephony platform (SIP trunk and cloud PBX) ## DECT/FRITZ!Fon: - **NEW** New start screen with current weather information ## Smarthome: - **NEW** FRITZ!DECT 440 measures humidity and allows its display with FRITZ!App Smart Home and FRITZ!Fon - **NEW** FRITZ!DECT 440 displays the QR code for simple connection with the Wi-Fi guest access - **NEW** Smart Home: Lightsequence "Wakeup/Sleep" for FRITZ!DECT 500 and compatible DECT LEDs - **NEW** Guest Access or answering machine can be switched on and off at the touch of a button on the FRITZ!DECT 440 - **NEW** Roller shutter control via FRITZ!DECT 440, FRITZ!Fon, and the FRITZ!Box user interface - **NEW** At the touch of a button on FRITZ!DECT 440 or 400, an internal phone rings and displays a message # Further Improvements of FRITZ!OS 7.25 ## Internet: - **Improved** Assignment to devices added to the access profile settings in the parental controls - **Improved** Device status (active/not active) is displayed in the selection of devices for port sharing - **Improved** Clearer display of port sharing overview on mobile devices - **Improved** Independent port sharing settings for a device are now permitted when the request was made over IPv6 for the IPv4 address of the device - and vice versa - **Improved** Event message when port 80 temporarily released for sharing in order to issue certificate for letsencrypt.org - **Improved** DNS over TLS (DoT) more robust - **Fixed** In certain scenarios, IP client operating mode could not be configured correctly via LAN with DHCP - **Fixed** Formatting errors occured in the configuration of IPv6 routes - **Fixed** Display corrected in the port sharing overview - **Fixed** After activating DNS over TLS (DoT) and longer run times, certain websites could no longer be resolved - **Fixed** After update of FRITZ!OS 7.03 or older, the IP address was not refreshed on MyFRITZ!Net (DynDNS) - **Fixed** Repeated dropping and reestablishment of VPN connections after automatic disconnection - **Fixed** IPv6: After the home network prefix was refreshed, invalid IPv6 addresses for guest access were not deleted - **Fixed** Changes to access profiles were sometimes rejected groundlessly with the error message "The list of blocked network applications with this ID already exists." - **Fixed** "PTR" type DNS queries were not always resolved correctly - **Fixed** IPv6: In IPv6 route advertisement (RA) with option 25 (Recursive DNS Server), sometimes bits from the "Reserved" field were set - **Fixed** After restoring factory settings, the first VPN connection configured no longer worked - **Fixed** After importing a configuration with an alternative LAN IPv4 network, the local DNS server remained in the old network after settings were adopted - **Fixed** The TR-064 parameter WANAccess was sometimes incorrect ("granted") when no WAN was available upon restart - **Fixed** "PTR" type DNS resolutions were not always possible - **Fixed** Sending of advanced support data did not trigger a push mail - **Fixed** When a saved configuration was adopted selectively, not all of the push mails originally configured were adopted - **Fixed** VPN connections via L2TP (e.g. in Windows 10) were unexpectedly slow - **Fixed** Device block had no effect in certain scenarios - **Fixed** When a FRITZ!Box was operated behind certain cable modems, brief interruptions of the internet connection occurred every 12 hours - **Fixed** In factory settings the first VPN connection could not be enabled for a single instance - **Fixed** Expanded failover protection with mobile dongles in modem mode did not work when using a non-functioning ADSL line - **Fixed** Expanded failover protection with mobile dongles and internet access via WAN/LAN 1 was not started under certain initial conditions present at the time of activation - **Fixed** Online Monitor for mobile communications did not always show data when "Advanced failover protection" was enabled ## Fiber: - **Fixed** System Stability Inreased - **Fixed** Interoperability to several fiber termination equipment (OLT) optimized - **Fixed** Detection of SFP module plugged into the FRITZ!Box stabilized - **Improved** Display of the wavelength for the FRITZ!SFP AON corrected - **Improved** Message in the event log for dectection of fiber optics technology more precise ## Wi-Fi: - **Improved** Reworked "Wi-Fi / Wi-Fi Channel" page - **Improved** Improved auto channel function after detection of interference sources (5-GHz band) - **Improved** Improved messages on Wi-Fi under "System / Event Log" - **Improved** Detection of multiple parallel WPS activations improved - **Improved** New message under "System / Event Log" when the maximum number of wireless repeaters is exceeded - **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language - **Change** In "Mesh Repeater" operating mode, only Wi-Fi networks with visible names are shown for selection of the Mesh Master - **Fixed** Erroneous display of bandwidth in connections with HUAWEI P30 corrected - **Fixed** After radar detection with reduced power mode (Green AP), initialization problems occurred in combination with 160 MHz bandwidth (VHT160) - **Fixed** After a FRITZ!OS update, the "Wi-Fi / Wi-Fi Channel" page did not show any Wi-Fi channels, and in some circumstances, no Wi-Fi networks in the environment - **Fixed** Activation of WPS immediately after the Mesh Master was started frequently led to non-DBDC uplinks to Mesh Repeaters - **Fixed** Incorrect message under "System / Event Log" for WPS during DFS wait time ## Mesh: - **Improved** Improved indications about adoption of settings enabled for a FRITZ!Box as Mesh Repeater - **Fixed** Incorrect formatting in the mobile view of the "Mesh Settings" page on a FRITZ!Box in "Mesh Repeater" mode - **Fixed** Settings for Wi-Fi schedule could not be changed under some circumstances, if the setting "FRITZ!Box as a Mesh Repeater" was used - **Fixed** For a FRITZ!Box configured as Mesh Master, but not as router (DHCP server), name and IP address of the router could not be changed - **Fixed** Display of Wi-Fi channel bandwidth in the user interface on the Mesh Master was sometimes different on the Mesh Repeater ## Smarthome: - **Improved** Smart Home: Improved - Template for fast changes to color settings and brightness on FRITZ!DECT 500 ## Telephony: - **Improved** Completely reworked settings pages for call diversion and call blocks - **Improved** First Configuration wizard offers configuration of a telephone - **Improved** Call diversions offer option to divert selected calls to a certain telephone on the FRITZ!Box - **Improved** Setting for using internal fax machine added to "Send faxes only" - **Improved** The "Email" and "RSS" tabs are hidden in the "Telephony / Telephony Devices" menu when DECT is switched off - **Improved** Display and management of entries in telephone books completely reworked (among others, photo visible in overview, columns can be selected for display, and selection of multiple entries added as well as copying and moving entries between telephone books) - **Improved** Settings for sending and receiving faxes combined under "Telephony / Telephony Devices" - **Improved** After all new received fax documents in the fax log have been opened, the "Info" LED stops flashing - **Improved** Integration of multiple CardDAV telephone books supported - **Improved** Better compatibility of the FRITZ!Box's SIP registrar to the SIP client LinPhone - **Improved** Better compatibility to telephone providers Easybell and VoIPfoneUK - **Improved** Enhanced compatibility for encrypted telephony - **Improved** For country setting "Germany" and telephone number configured automatically by provider, the area code included in the number is detected automatically and adopted in the line settings - **Improved** Voice quality better for telephone calls in mobile networks and for international calls - **Improved** Forwarding of calls accepted on Snom IP telephones supported without query - **Improved** Stability - **Change** Adjustment to the changed behavior of the T-Net-Box when calls are rejected, for instance due to call blocks - **Fixed** Web address of the CardDAV server could not be changed in online telephone books after entry - **Fixed** On a FRITZ!Box used as a Mesh Repeater for telephony, it was possible to edit the telephony numbers adopted from the Mesh Master and also to create new telephony numbers - **Fixed** Telekom SIP trunking account could not be disabled - **Fixed** In integrated iCloud contacts (Apple), first and last names were sometimes displayed in inconsistent order - **Fixed** During synchronization of entries in online contacts (CardDAV), in certain constellations all email addresses were deleted - **Fixed** Certain telephone numbers were temporarily not registered (among them Sipgate, EnviaTel, Teledate) - **Fixed** Connections dropped after about 30 seconds for telephony connections secured by TLSonly (among others, KPN) - **Fixed** In certain constellations, only one-way voice transmission was possible during telephony via IPv6 - **Fixed** Unsuitable presettings for telephony provider Vodafone Italy - **Fixed** Registration of telephone numbers was not possible with telephony profile for provider Vodafone Italia - **Fixed** Sporadic errors when faxing via T.38 connections - **Fixed** No hold announcement after resetting to factory settings - **Fixed** Pickup on IP telephones was possible for no longer than 4 seconds - **Fixed** After a fax was sent, the name of a recipient selected via the telephone book was not displayed in the call list - **Fixed** Editing of door intercom stations sometimes led to loss of email notification for door intercom stations - **Fixed** After importing answering machine settings including saved messages into another FRITZ!Box model, sometimes the imported messages could no longer be played back - **Fixed** Ring sequences incorrect for the country setting "Australia" - **Fixed** Sporadic loss of schedule settings for the answering machine after updating FRITZ!OS ## Home Network: - **Improved** Faster display of network connections in very large networks - **Improved** When leaving the device details a message concerning changed device names is displayed only if the name was actually changed - **Change** When an individual name is set for the FRITZ!Box, the name of the working group for home network sharing ("USB/Storage") remains unchanged - **Fixed** The section for blocking devices was displayed in the device details of guest devices even though this function is reserved for home network devices - **Fixed** Changed IP settings of the FRITZ!Box were not offered for printing - **Fixed** Time synchronization (NTP) was instable in certain scenarios ## System: - **Improved** Configuration wizard can be interrupted and resumed - **Improved** Various usability improvements in the First Configuration wizard - **Improved** Status overview page within the first configuration - **Improved** Security query when leaving a page without saving changed settings - **Improved** Saving and restoring settings now includes telephony data from the internal storage of the FRITZ!Box (ring tones, telephone book pictures, voice messages) - **Improved** After support data have been sent to AVM, a second dispatch can be started immediately without any wait time - **Improved** A password can be made visible during entry (eye icon) in the user interface - **Improved** Corrected details in the "Diagnostics / Function" for Mesh and USB - **Change** Offer to switch to "Level III: Notify me about new versions of FRITZ!OS and install new versions automatically (recommended)" is now offered after updating only when "Level II: Notify me about new versions of FRITZ!OS and install necessary updates automatically" was previously configured - **Change** The option to log in to a FRITZ!Box (user interface) without a password, which was not recommended, is no longer supported *1 - **Change** If "only with the FRITZ!Box password" was set up for logging in to the user interface, a FRITZ!Box user with the name "fritz" and a random four-digit number together with the FRITZ!Box password will be created automatically. To log in to the user interface in the home network, entering the FRITZ!Box password is still sufficient. *2 - **Fixed** FRITZ!Box users could not be sorted in the overview - **Fixed** Access profiles with blocked applications in parental controls were not available when settings were restored - **Fixed** Number of messages in "System / Event Log" was too restricted in some areas - **Fixed** Display of installation date for the last update was incorrect in certain scenarios -------------------- Notes: *1. The home network login mode without a password, which is not recommended, is no longer supported. For the initial access to the user interface after the FRITZ!OS update, the user needs to assign a FRITZ!Box password (additional confirmation required) *2. Automatic generation of a user according to the naming structure fritz and a random four-digit number if login before the update took place only with the FRITZ!Box password. Important information for developers of apps that would like to register with FRITZ!Box can be found at avm.de/service/schnittstellen -------------------- # New functions of FRITZ!OS 07.21 ## Internet: - **NEW** With parental controls enabled, settings and ticket entry for the device to be accessed are displayed when the user interface is opened - **NEW** Support for encrypted resolution from domain names to IP addresses (DNS over TLS) ## Wi-Fi: - **NEW** Encryption according to the new WPA3 standard (including Wi-Fi guest access, connections to Mesh Repeaters and internet access via Wi-Fi with SAE) - **NEW** An open Wi-Fi network can be offered at the Wi-Fi guest access, in which only data are transmitted in encrypted form (Enhanced Open/Opportunistic Wireless Encryption, OWE) - **NEW** 160-MHz channel bandwidth is now always active in the 5-GHz band, providing for very high transmission rates with compatible wireless device ## Mesh: - **NEW** Mesh auto-channel: Accounts for the wireless environment of the Mesh Repeater in selecting the best Wi-Fi channel for the entire Mesh ## Telephony: - **NEW** Support for online contacts from Apple (iCloud), Telekom Mail, and CardDAV providers - **NEW** Support for encrypted telephony (TLS and SRTP) for Deutsche Telekom, Easybell and dus.net ## DECT/FRITZ!Fon: - **NEW** Nine new ring tones to choose from - **NEW** Smart telephone book displays matching suggestions even during number entry - **NEW** Sound settings for playing back web radio stations and to improve the speech quality of telephone calls - **NEW** Start screen to display the temperature of a compatible Smart Home device in the home network (for instance, FRITZ!DECT 200, FRITZ!DECT 30x, FRITZ!DECT 440) ## Home Network: - **NEW** Network passwords for the powerline network can now be changed on FRITZ!Powerline devices connected directly (via LAN) ## Smart Home: - **NEW** Smart Home: NEW - Reworked Smart Home pages on the FRITZ!Box user interface - **NEW** Smart Home: NEW - Synchronization of the temperature setting, the boost mode and open window detection within a group of radiator controls - **NEW** Smart Home: NEW - Display of total consumption (kWh) of the past two years for the smart plugs FRITZ!DECT 200 and 210 - **NEW** Smart Home: NEW - The "Adaptive Heating" feature of the FRITZ!DECT 301 makes the configured temperature available at the desired time - **NEW** Smart Home: NEW - Supports the FRITZ!DECT 500 LED light - **NEW** Smart Home: NEW - Supports the four-button switch FRITZ!DECT 440 - **NEW** Smart Home: NEW - Supports the DECT ULE/HAN FUN roller blinds profile ## System: - **NEW** Time period for automatic updates can be defined - **NEW** NEW - Users supported in becoming acquainted with FRITZ!Box functions with welcome page - **NEW** Display of the user interface in English, French, German, Italian, Polish or Spanish - **NEW** Setting of language, country and time zone for FRITZ!Box operation # Additional improvements in FRITZ!OS 07.21 ## Internet: - **Fixed** Bidirectional data transfer was too low between DSL and Wi-Fi - **Improved** Message upon failed ticket entry (parental controls) - **Improved** Display and modification of the IPv6 Interface ID under "Home Network / Network / Network Connections" - **Improved** Any domain name can be used to address a VPN remote peer, not just MyFRITZ! domain names - **Improved** NetBIOS permission can be configured individually for a single VPN connection - **Improved** Ticket for parental controls can be entered before start of online block, so that usage time can be extended without interruption - **Improved** Additional links from the user interface in the online help for IPv4 and IPv6 routes under "Network Connections" - **Improved** Optimized display of the DSL/Fiber information in the user interface - **Improved** IPv6 prefix delegations and IPv6 subnets are displayed under "Home Network / Network / Network Settings" - **Improved** IP address range for guest network increased to up to 253 devices - **Improved** Incorrect configuration by using the same network address on both sides of a LAN-LAN linkup for VPN prevented - **Improved** Access to the myfritz.net domain for a downstream FRITZ!Box registered with MyFRITZ! allowed from the home network - **Improved** Greatly improved performance for VPN - **Improved** In the context of encrypted name resolution (DNS over TLS, DoT), SNI (Server Name Indication) is supported - **Improved** Support for multiple DNS queries over a single TCP connection - **Change** Unnecessary settings option for connection speed removed from "IP Client" mode - **Change** Button for changing the access profiles under the Parental Controls Overview in the user interface - **Change** First configuration simplified by removing the double query about DSL or WAN connection - **Change** Kabel BW and Unitymedia removed from provider list - **Change** "Emule" protocol removed from selection for port sharing - **Change** IP compression (data compression) is no longer supported in VPN connections - **Fixed** Option for "PPPoE Passthrough" missing under "other providers" - **Fixed** "Diagnostics / Function" showed wrong error message for MyFRITZ! registration for FRITZ!Boxes in IP client mode - **Fixed** Defective links behind "MyFRITZ!" under "Diagnostics / Security" - **Fixed** VPN connection name was not displayed in network connections and Mesh Overview - **Fixed** In the VPN overview table "local network" was missing and "remote network" left empty - **Fixed** Devices that are connected to a downstream router via IPv6 prefix delegation received no IPv6 internet connection when parental controls were enabled - **Fixed** Devices that are connected to a downstream router via IPv4 static routes received no IPv4 internet connection when parental controls were enabled - **Fixed** Port sharing for different devices with the same name could not be created - **Fixed** Adaptations of DSL line speed were no longer accounted for after restart - **Fixed** Occasional restarts of FRITZ!Box during many parallel FTP transmissions over WAN - **Fixed** Problems with umlauts in the parental control filter lists - **Fixed** Guest network lock in the parental controls did not lock reliably - **Fixed** No automatic Wake on LAN (WoL) via VPN - **Fixed** Prioritization settings for devices with the "Everything except surfing and mail" access profile were no longer applied after rebooting ## Wireless: - **Improved** Redesigned the print output of information on the wireless guest access - **Improved** "WPA3" option added to the encryption of the FRITZ!Box in "Mesh Repeater" operating mode - **Change** Reworked information page (for instance, after changes to Wi-Fi configuration) - **Change** WPS/PIN method removed - **Change** Outdated WPA/TKIP encryption removed - **Fixed** "Wireless / Guest access": Duration for disabling automatically could not be changed - **Fixed** Sorting by MAC addresses in "Wi-Fi / Wi-Fi Network / Security" did not work - **Fixed** "Delete" button for devices was displayed even if the device could not actually be deleted - **Fixed** PMF option no longer offered for "WPA/TKIP" encryption selection - **Fixed** Detection of interference did not work under certain rare circumstances - **Fixed** Time stamp "Wireless LAN channels used" corrected (5-GHz band) - **Fixed** Incorrect entry no longer appears in the "Event Log" when individual wireless bands were enabled or disabled manually on a FRITZ!Repeater 3000 - **Improved** Better stability - **Fixed** Info sheet (for printout) with account information for Wi-Fi guest access corrected - **Fixed** In "Mesh Repeater" operating mode, the connection to the Mesh Master via 5 GHz was lost sporadically ## Mesh: - **Improved** Rendering of DHCP host name, media server name and SMB name on Mesh Repeaters improved - **Improved** Improved text for configuration of a FRITZ!Box as a Mesh Repeater - **Improved** Better detection of terminal devices that cannot be rerouted via Mesh steering - **Improved** Notification in FRITZ!Box log when a network loop is created (for instance, simultaneous LAN and wireless connection to the same device) - **Improved** Notification in FRITZ!Box log when a network loop is created (for instance, simultaneous LAN and wireless connection to the same device) - **Change** On a FRITZ!Box configured as a Mesh Repeater, the option for adopting the settings in the Mesh is offered only after Mesh was enabled on this FRITZ!Box - **Fixed** Display of FRITZ!Powerline 520/530E in the Mesh connection diagram was not correct - **Fixed** In certain cases a FRITZ!Repeater was displayed twice in the "Mesh Overview" of the FRITZ!Box - **Fixed** When telephony in the Mesh is used, telephony registration of a FRITZ!Box used as a Mesh Repeater was sometimes prevented by the Mesh Master - **Fixed** For wireless guest access the steering characteristics (11k/v) of wireless devices were not taken into account correctly (Google Pixel 2 and SAMSUNG S10) ## Telephony: - **Improved** Calls from door intercoms (including images) added to "Calls" push mail - **Improved** "Always register via an internet connection" option added for SIP trunk providers - **Improved** More detailed messages for security-relevant changes to settings - **Improved** New telephony providers added for the country setting "Italy": TIM, Fastweb, Vodafone and others - **Improved** Telephony providers O2, PYUR and multiple SIP trunk providers added - **Improved** Telephone numbers can be assigned to multiple answering machines, so that up to ten different greetings can be scheduled to play on one telephone number - **Improved** For operation of ISDN devices, advanced settings are offered under "Telephony Device" in the user interface - **Improved** The call list in the user interface offers a separate view for rejected calls - **Improved** For company lines (SIP trunk and SIP DDI lines), a settings offered to support setting any telephone numbers desired (CLIP no screening) - **Improved** Integrated fax function supports sending up to ten pages of text - **Improved** If a storage location is set in the fax function of the FRITZ!Box, sent faxes will be stored there along with received faxes - **Improved** New methods for call diversion to external destinations supported for certain telephony providers (302 - Moved temporarily) - **Improved** Automatic configuration of telephone numbers for provider Telekom adapted to the latest network demands - **Improved** Increased robustness of telephony against partial failure of network infrastructures when TCP internet protocol in use - **Improved** Better interoperability with Swiss provider sipcall - **Improved** Maximum length for hold announcement of answering machine increased from 8 to 30 seconds - **Improved** Transfer/Forwarding of calls supported (without a query) on IP telephones to other telephones connected with the FRITZ!Box - **Change** New missed calls are no longer displayed with a flashing "Info" LED on the FRITZ!Box - **Change** New fax and email messages for answering machine services (like the Telekom SprachBox) are no longer displayed with a flashing "Fon" LED on the FRITZ!Box - **Fixed** Under the "SIP trunking" selection, telephone numbers could not be created for providers that could be selected for another telephony provider using the same registrar - **Fixed** Under the "Other Provider" selection, telephone numbers could not be created for providers that could be selected for another telephony provider using the same registrar - **Fixed** Automatic fax recognition for the telephone numbers of the analog landline could not be set up - **Fixed** Changes to the settings for the proxy server and STUN server were not adapted in the telephone numbers - **Fixed** When the fax function was started in the user interface, only an empty page was displayed if there was an entry without a telephone number in the telephone book - **Fixed** Telephone numbers set to "Only via IPv6" could not be switched to use IPv4 without an IPv6 internet connection - **Fixed** When preparing a fax in the integrated fax machine for sending, the contents in the "To" field were deleted after selecting a telephone book entry and switching to another input field - **Fixed** For IP door intercom systems with multiple doorbells, sometime the desired ring tone was not used - **Fixed** When listening to messages on the integrated answering machine with an ISDN telephone, the key shortcut for callback did not work - **Fixed** No internet connection with LTE mobile communications dongles from Huawei when using a rate without LTE support ## DECT/FRITZ!Fon: - **Improved** Telephone book display for FRITZ!Fon C4, C5 and C6 now faster - **Improved** Setting up call blocking in the handset is now easier - **Improved** Display of FRITZ!Box events with "OK" button in the "FRITZ!Box" start screen - **Improved** Pictures can also be browsed with up/down rocker ## Home Network: - **Improved** "Mesh" added to properties in the network connection overview - **Improved** Mesh icon shifted in the Mesh table from the "Connections" column to the "Properties" column - **Improved** Reliable display of new AVM Powerline products in the FRITZ!Box home network - **Improved** More reliable indication of low powerline data rates in the FRITZ!Box home network - **Change** "Smart Home" menu moved to top menu level and "DECT" menu moved to the telephony menu ## Smart Home: - **Improved** Fiber: Improved - Optimized display of the "Fiber Information" in the user interface - **Change** Smart Home: Change - Display of low battery level on Smart Home devices now only on the FRITZ!Box user interface, by push service, and on connected FRITZ!Fon devices - **Fixed** Smart Home: Fixed - Wrong target temperature when accessing the FRITZ!Box via MyFRITZ! - **Fixed** Smart Home: Fixed - Template for radiator control did not work if heating was off during 01/01 until 31/12 ## System: - **Improved** Device name displayed the same everywhere in the Mesh - **Improved** "FRITZ!Box Info" push service now includes an option for information on the "Home network" - **Improved** New menu icons for "Overview" and "Smart Home" - **Improved** "Reset" function in details of network devices for deleting all settings for this device - **Improved** Diagnostics check expanded to include "Mesh", "Internet", "DECT" and "Wi-Fi" - **Improved** FRITZ!Box support page now includes option to send support data directly to AVM - **Improved** Separate restoration of settings for the Smart Home and Telephony areas - **Improved** Modernized display of "LEDs" and other symbols throughout the user interface - **Improved** Upon the first restart after the update, activation of automatic updates is offered (auto-update level III) - **Improved** Warning on the FRITZ!Box Overview on selected settings that are not recommended - **Improved** Page structure simplified in many areas of the user interface to improve usability - **Improved** Reworked concept for navigation in the wizard for first configuration - **Improved** Overview of authorized apps in the "System / FRITZ!Box Users" area now also includes rights and time of last login - **Improved** Update information is included in event log (visible only with the next update) - **Improved** Update process optimized for automatic updates (silent update, task 60018) - **Change** WAN port can be switched as 5th LAN interface if this is not needed as a WAN connection to the internet provider - **Change** In the factory settings, the WAN port always works as a WAN interface (an existing setting as 5th LAN interface for this connection is not changed by the update) - **Change** Update setting upon delivery is now auto update level III (updates are installed automatically) - **Change** User with the name "ftpuser-internet" is deleted ## Security: - **Improved** More detailed message about security-relevant changes under "System / Event Log" - **Improved** Display of the ports that can be reached from the home network under "Diagnostics / Security" - **Change** Waiting for the additional confirmation of a change is indicated by the flashing of all LEDs ------------------------------------------------------------- **Instructions for installing the update:** Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen. ------------------------------------------------------------- (c) AVM GmbH 2004-2023. All rights reserved. This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt). The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de. AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in writing, and except for in cases permitted by law, it is particularly forbidden for this AVM firmware packet to be - copied, propagated, or in any other manner made publicly accessible, or - processed, disassembled, reverse engineered, translated, decompiled or in any other manner "opened" and subsequently copied, propagated or made publicly accessible in any other manner. HKR 2024/06/03